Compatible trainers and watches
Spindro picks the protocol on its own: FTMS, then Tacx FE-C over Bluetooth, then Wahoo legacy, then read-only Cycling Power or Speed & Cadence. Below is what we support and how sure we are.
What the labels mean
- Verified Tested on the real device by the author.
- Partly verified Some functions were tested on the real device; the rest was not.
- Should work, not yet verified The protocol is supported by the code, but this model has never been tried.
- Reported by users Users told us it works. No report has been collected yet.
Smart trainers and sensors
| Device | Protocol | Status | Notes |
|---|---|---|---|
| Van Rysel D100Decathlon | FTMS | Verified | Tested by the author on the real trainer: connection, virtual gears, ERG and slope mode. It does not send cadence, so Spindro estimates it from flywheel speed; calibrate it in Settings. |
| Van Rysel D500Decathlon | FTMS | Should work, not yet verified | Same protocol as the D100. Not tested yet. |
| Suito, Direto, JustoElite | FTMS | Should work, not yet verified | Standard FTMS trainers. Not tested yet. |
| KICKR, KICKR CORE (recent firmware)Wahoo | FTMS | Should work, not yet verified | With recent firmware they speak FTMS. Not tested yet. |
| Zwift HubZwift | FTMS | Should work, not yet verified | Bluetooth FTMS. Not tested yet. |
| H3, H4Saris | FTMS | Should work, not yet verified | Standard FTMS trainers. Not tested yet. |
| Other FTMS trainers (Magene, Thinkrider, JetBlack…) | FTMS | Should work, not yet verified | Any trainer that advertises the Bluetooth FTMS service should connect. Reports welcome. |
| Flux, Vortex, Bushido, Genius, Neo, Flow smartTacx | Tacx FE-C over BLE | Should work, not yet verified | Also works on models without FTMS. Written and tested only against a simulated trainer, not yet on a real Tacx. |
| KICKR, SNAP, CORE (older firmware)Wahoo | Wahoo legacy | Should work, not yet verified | Wahoo's older control protocol. Tested only against a simulated trainer, not yet on a real Wahoo. |
| Trainers with a power meter or speed/cadence sensor | Cycling Power / Speed & Cadence | Should work, not yet verified | Read-only: Spindro shows power, speed and cadence but cannot change the resistance. |
Controllers and heart rate
| Device | Protocol | Status | Notes |
|---|---|---|---|
| Zwift Click (v2)Zwift | Zwift BLE | Partly verified | Only the + and − keys were used on real hardware (a Click that came with a Van Rysel D100). The arrows and A/B/Y/Z follow open-source tables and are not confirmed: the key check in the app lets you verify and map them. |
| Zwift Play, Zwift RideZwift | Zwift BLE | Should work, not yet verified | Experimental. Written from open-source projects and tested only against simulated devices. Some firmware versions encrypt the buttons, which is not implemented; use the on-screen buttons if nothing happens. |
| Heart rate straps and watches in “broadcast heart rate” mode | Heart Rate (BLE) | Should work, not yet verified | Standard Bluetooth heart rate service. |
Watches and bike computers
| Device | Protocol | Status | Notes |
|---|---|---|---|
| Garmin (Forerunner, Fenix, Edge, Venu…)Garmin | BLE sensor bridge (Android app) | Should work, not yet verified | The phone appears as a power, cadence and speed sensor. Built for Garmin watches, but not tested by us on real hardware, so it is listed as should-work. If the watch is already linked to the phone it may need the steps in the app's help. Android app only. |
| Wahoo ELEMNT, Coros, Suunto, Polar | BLE sensor bridge (Android app) | Should work, not yet verified | In theory any device that accepts Bluetooth power sensors. Not tested yet. Android app only. |
Tacx FE-C and Wahoo legacy support have been tested only against a simulated trainer. A trainer that accepts only one Bluetooth connection cannot be used by Spindro and another app at the same time.
How to connect
Spindro needs Web Bluetooth, or the Android app. What works where:
- Android app
- Bluetooth is built in. Android asks once for “Nearby devices”; known devices reconnect by themselves.
- Chrome or Edge on Android
- Web Bluetooth. Bluetooth on, and the “Nearby devices” permission for the browser.
- Chrome, Edge or Opera on Windows, macOS, Linux, ChromeOS
- Web Bluetooth. The page must be served over HTTPS.
- iPhone and iPad, any browser
- No Web Bluetooth, and there is no Spindro app for iOS. A browser that adds it, such as Bluefy, should work; we have not tried it.
- Safari on Mac, Firefox
- No Web Bluetooth. Use Chrome or Edge.
The connection flow (suggesting the next device, reconnecting, dropouts, “Test resistance”) has been exercised with simulated Bluetooth devices only.
Tell us about yours
Tried a trainer or watch? In the app, use “Report a problem”, or open an issue on GitHub with the model, what worked and what did not. Reports turn “should work” into “reported by users”.